Loveland CO 80537
PHN: (970) 461-9600
FAX: (970) 461-9605
888-BRAYDEN (272-9336)
MPS-1
Metering Power Supply
The MPS-1 Meter Power Supply, a low-cost DC power supply option, provides an isolated low-voltage DC wetting voltage designed specifically for KYZ pulse metering applications. Packaged in the convenient SSI “small footprint” case, the MPS-1 can be used in any application where a wetting voltage is needed to go through a KYZ pulse initiator and into another pulse input device such as a SCADA system, RTU, energy management system, KYZ pulse totalizer, electric meter pulse input or other telemetry or control systems which accept pulses.
The MPS-1 is available in standard outputs of:
- MPS-1-12 (12VDC)
- MPS-1-15 (15VDC)
- MPS-1-24 (24VDC)
Other output voltages are available between 3VDC and 24VDC. Specify the output voltage needed by adding the DC voltage after the MPS-1 model number (i.e. MPS-1-18 to indicate a 18VDC output).
The power supply’s low-current design provides up to 40mA for the pulse metering circuit. The output is internally current-limited and provides a fuse to prevent damage in the event of a short circuit condition. In addition, the MPS-1 power supply includes MOV transient suppression devices on both the 120/208-277 power supply input and the DC output.
SPECIFICATIONS
ELECTRICAL |
|
| Power Input: | 120/208-277VAC |
| Output Voltage: |
+3VDC to +24VDC, specifed at the time of order |
| Output Current: |
Nominal 40mA |
| Fuse: |
.1A (100mA) |
| Voltage Regulation: |
10mV @ 100% load |
MECHANICAL |
|
| Mounting: | Any position |
| Size: | 3.27” wide, 5.7” high, 1.50” deep |
| Weight: | 1lb |
TEMPERATURE |
|
| Temperature Range: | -38° C to +70° C, -36.4° F to +158° F |
| Humidity: | 0 to 98% non-condensing |
OPTIONS |
|
| Input Voltages: |
Contact Factory |