The TID-1 telephone interface device is a low-cost telephone line termination and protection device that provides additional surge protection against transient voltage that may affect the inner wirings of a home or business. Convenient and easy, the connection of an electric meter’s modem to the telephone line is simple.
It provides two terminals for standard phone line interface to a modular phone jack (Tip and Ring 1) plus ground.
The TID-1 features a NEMA 3R PVC enclosure and offers excellent electrical insulation. In addition, the TID-1 provides transient voltage surge suppression to protect the meter’s modem from lightning or other electrical disturbances that may affect the telephone line inside the home or business. A number of mounting options are available (listed below) and a gasketed lid ensures that the circuit inside remains dry and clean.
TID-1A: No holes, vertical mounting feet
TID-1B: One 7/8” hole in back; one 7/8” hole on bottom for 1/2” conduit coupling, vertical mounting feet
TID-1C: Two 7/8” holes on bottom for 1/2” conduit connections, horizontal mounting feet
TID-1D: One 7/8” hole on bottom for 1/2” conduit coupling, vertical mounting feet
ELECTRICAL |
|
| Power Input: | No power required |
| Insulation Resistance: | 50 megohms typical |
MECHANICAL |
|
| Mounting: | Any position |
| Size: | 4” wide, 4” high, 2” deep |
| Weight: | ~1 pound, depending on mounting configuration |
TEMPERATURE |
|
| Temperature Range: | -38° C to +70° C, -36.4° F to +158° F |
| Humidity: | 0 to 98% non-condensing |
OPTIONS |
|
| Input Voltages: | Contact Factory |